您的位置：首页 > 产品中心 > Opticap
Opticap
Opticap® XLT30 Polygard®
| 产品编号： | 4061378 |
| 规格： | inlet connection diam. 1.5 in., pore size 1.2 μm, cartridge nominal length 30 in. (75 cm) |
| 包装规格： | 1 EA |
| 产品类别： | 进口试剂 |
| 品牌： | Millipore |
| 优惠价： | 立即咨询 |
产品别名
Opticap
Opticap® XLT30 Polygard®
Opticap XLT 30" Polygard CN 1.2 um 1.5" TC/TC 1/pk
基本信息
| eCl@ss | 32031690 |
| General description【一般描述】 | T-line/Gauge Port: T-line Device Configuration: 取样皿滤膜 |
| Features and Benefits【特点和优势】 | Format: Single Layer |
| Other Notes【其他说明】 | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Directions for Use
|
| Preparation Note【制备说明】 | Sterilization Method 3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable |
| Analysis Note【分析说明】 | Gravimetric Extractables: after 24 hours in water at controlled room temperature |
| Legal Information【法律信息】 | OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany |
产品性质
| Quality Level【质量水平】 | 400 |
| material【物料】 | polypropylene polypropylene housing polypropylene support polypropylene vent cap silicone seal |
| reg. compliance | meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials) |
| manufacturer/tradename | Opticap® |
| parameter【参数】 | 25 ℃ max. inlet temp. 80 psig max. inlet pressure |
| cartridge nominal length | 30 in. (75 cm) |
| inlet connection diam. | 1.5 in. |
| outlet connection diam. | 1.5 in. |
| overall size【总尺寸】 | 30 in. |
| impurities【杂质】 | ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction) <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction) |
| gravimetric extractables | ≤165 mg/capsule |
| matrix【基质】 | Polygard®-CN |
| pore size【孔径】 | 1.2 μm nominal pore size 1.2 μm pore size |
| input | sample type liquid |
| fitting【配件】 | inlet sanitary flange 38 mm (1 outlet sanitary flange |
| packaging【包装】 | Double Easy-Open bag |
