Corning^® disposable aseptic transfer caps for GL45 plastic spinner flasks

NB.11

These disposable Corning^® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10^-6 SAL), individually double bagged and fit the side arms on 500 mL Corning Disposable Spinner Flasks (Cat. No. CLS3561).

• Cap is made of high density polyethylene; autoclaving is not recommended.
• The venting port ends in a 25 mm diameter vent filter with a 0.2 μm pore PVDF membrane and a barbed fitting.
• The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 in. I.D. (3.2 mm), 1/4 in. O.D. C-Flex^® tubing ending in a male Luer lock (MLL) connector closed with a female Luer sealing cap.

C-Flex is a registered trademark of Concept Polymer Technologies Inc.
Corning is a registered trademark of Corning, Inc.

high-density polyethylene cap (filling cap)
polystyrene

sterile

disposable
thread finish: 45 GL

pack of 1
case of 2

Corning 3565

orange cap